gBar/data/config

# Example configuration.
# Everything after '#' is ignored
# Format of the variables:
#    [variable]: [value]
# Whitespaces are ignored in the following locations:
# - Before the variable
# - After the ':'
# - After the value
#
# String variables can be escaped ([Notation in config] -> "Result"):
# - foo\\bar -> "foo<backlash>bar"
# - foo\nbar -> "foo<newline>bar"
# - foo\sbar -> "foo bar"

# If true, gBar ignores *.scss files and only tries to load *.css files.
# This is useful, if you don't want to SCSS, or if you want to use newer SCSS features,
# that libsass (the backend gBar uses) doesn't support.
ForceCSS: false

# The following three options control the ordering of the widgets.
# Reordering can cause slight margin inconsistencies,
# so it is recommend to only make minor adjustments to the default layout.
# Adding the same widget multiple times to the layout is *not* supported and will cause issues.

# Widgets to show on the left side
WidgetsLeft: [Workspaces]
# Widgets to center
WidgetsCenter: [Time]
# Widgets to display on the right side
WidgetsRight: [Tray, Packages, Audio, Bluetooth, Network, Disk, VRAM, GPU, RAM, CPU, Battery, Power]

# The CPU sensor to use
CPUThermalZone: /sys/devices/pci0000:00/0000:00:18.3/hwmon/hwmon2/temp1_input

# The card to poll when using AMDGPU. If you don't have an AMD card, you can skip this config.
# Possible values can be found by querying /sys/class/drm
DrmAmdCard: card0

# Relative path to AMD gpu thermal sensor, appended after /sys/class/drm/<DrmAmdCard>
AmdGPUThermalZone: /device/hwmon/hwmon1/temp1_input

# The command to execute on suspend
SuspendCommand: ~/.config/scripts/sys.sh suspend

# The command to execute on lock
LockCommand: ~/.config/scripts/sys.sh lock

# The command to execute on exit
ExitCommand: killall Hyprland

# The folder, where the battery sensors reside
BatteryFolder: /sys/class/power_supply/BAT1

# Threshold, when the battery is considered low and a different color (as specified by the 'battery-warning' CSS property) is applied
BatteryWarnThreshold: 20

# The partition to monitor with disk sensor
DiskPartition: /

# Overrides the icon of the nth (in this case the first) workspace.
# Please note the missing space between "," and the symbol. Adding a space here adds it to the bar too!
#WorkspaceSymbol: 1,

# The default symbol for the workspaces
DefaultWorkspaceSymbol: 

# All of the icons that can be modified.
# Please note that some icons require a space ("\s") (e.g. default ShutdownIcon)
ShutdownIcon: \s
RebootIcon: 󰑐
SleepIcon: 󰏤
LockIcon: 
ExitIcon: 󰗼
BTOffIcon: 󰂲
BTOnIcon: 󰂯
BTConnectedIcon: 󰂱
DevKeyboardIcon: 󰌌\s
DevMouseIcon: 󰍽\s
DevHeadsetIcon: 󰋋\s
DevControllerIcon: 󰖺\s
DevUnknownIcon: \s
SpeakerMutedIcon: 󰝟
SpeakerHighIcon: 󰕾
MicMutedIcon: 󰍭
MicHighIcon: 󰍬
PackageOutOfDateIcon: 󰏔\s

# Scroll through the workspaces of the current monitor instead of all workspaces
WorkspaceScrollOnMonitor: true

# When true: Scroll up -> Next workspace instead of previous workspace. Analogous with scroll down
WorkspaceScrollInvert: false

# Number of workspaces to display. Displayed workspace IDs are 1-n (Default: 1-9)
NumWorkspaces: 9

# Hide trailing unused workspaces (by ID). A workspace is considered unused, if it has no window on it
WorkspaceHideUnused: true

# Use Hyprland IPC instead of the ext_workspace protocol for workspace polling.
# Hyprland IPC is *slightly* less performant (+0.1% one core), but way less bug prone,
# since the protocol is not as feature complete as Hyprland IPC.
# NOTE: Hyprland no longer supports ext-workspace-unstable-v1 as of commit bb09334.
# Hyprland IPC is thus *required* for workspace support under Hyprland >=v0.30.0!
UseHyprlandIPC: true

# The location of the bar
# Needs to be capitalized!!
# Values are: L (Left), R (Right), T (Top), B (bottom)
Location: T

# When the location is set to side, this option forces everything (even text) to be right-side up.
# *Always* make sure to enable SensorTooltips when enabling this option. Failure to do so *will* cause graphical issues.
IconsAlwaysUp: false

# Forces the widgets in the center to be centered.
# This can cause the right widget to clip outside, if there is not enough space on screen (e.g. when opening the text)
# Setting this to false will definitely fix this issue, but it won't look very good, since the widgets will be off-center.
# So try to decrease "CenterSpace" first, before setting this configuration to false.
# Legacy name: CenterTime
CenterWidgets: true

# How much space should be reserved for the center widgets. Setting this too high can cause the right widgets to clip outside.
# Therefore try to set it as low as possible if you experience clipping.
# Although keep in mind, that a value that is too low can cause the widget to be be off-center,
# which can also cause clipping.
# If you can't find an optimal value, consider setting 'CenterWidgets' to false
# Legacy name: TimeSpace
CenterSpace: 300

# Set datetime style
DateTimeStyle: %a %D - %H:%M:%S %Z

# Set datetime locale (defaults to system locale if not set or set to empty string)
#DateTimeLocale: de_DE.utf8

# How many characters of the title can be displayed. Note that higher values *will* cause styling issues, especially when it is in the center.
# If you have the title in the center, consider also increasing "CenterSpace"
MaxTitleLength: 30

# Adds a audio input(aka. microphone) widget
AudioInput: false

# Sets the audio slider to be on reveal (Just like the sensors) when true. Only affects the bar.
AudioRevealer: false

# Sets the rate of change of the slider on each scroll. In Percent
AudioScrollSpeed: 5

# Display numbers instead of a slider for the two audio widgets. Doesn't affect the audio flyin
AudioNumbers: false

# Manually perform the flyin animation for the audio widget. Enabling this can cause some graphical issues (Damage tracking issues after the flyin disappers) on Hyprland.
# So it is recommended to disable this on Hyprland and configure the flyin animation there:
#   layerrule = animation slide, gbar-audio
ManualFlyinAnimation: false

# Command that is run to check if there are out-of-date packages.
# The script should return *ONLY* a number. If it doesn't output a number, updates are no longer checked.
# Default value is applicable for Arch Linux. (See data/update.sh for a human-readable version)
CheckPackagesCommand: p="$(checkupdates)"; e=$?; if [ $e -eq 127 ] ; then exit 127; fi; if [ $e -eq 2 ] ; then echo "0" && exit 0; fi; echo "$p" | wc -l


# How often to check for updates. In seconds
CheckUpdateInterval: 300

# Limits the range of the audio slider. Only works for audio output.
# Slider "empty" is AudioMinVolume, Slider "full" is AudioMaxVolume
# AudioMinVolume: 30 # Audio can't get below 30%
# AudioMaxVolume: 120 # Audio can't get above 120%

# The network adapter to use. You can query /sys/class/net for all possible values
NetworkAdapter: eno1

# Disables the network widget when set to false
NetworkWidget: true

# Use tooltips instead of sliders for the sensors
SensorTooltips: false

# The size of the of the circular sensors
SensorSize: 24

# The size of the network icon
NetworkIconSize: 24

# Enables tray icons
EnableSNI: true

# SNIIconSize sets the icon size for a SNI icon.
# SNIPaddingTop Can be used to push the Icon down. Negative values are allowed
# SNIIconName overrides what icon from an icon theme to display.
# SNIDisabled prevents an icon from being registered.
# For all SNI properties: The first parameter is a filter of the tooltip(The text that pops up, when the icon is hovered) of the icon.
# The wildcard filter '*' does not work for SNIIconName and SNIDisabled

# Scale everything down to 25 pixels ('*' as filter means everything)
#SNIIconSize: *, 25
# Explicitly make OBS a bit smaller than default
#SNIIconSize: OBS, 23
# Nudges the Discord icon a bit down
#SNIPaddingTop: Discord, 5
# Override the default icon given to gBar by discord to an icon theme supplied one (Example is from papirus theme)
#SNIIconName: Discord, discord-tray
# Prevents steam from displaying. Note: Steam doesn't have a tooltip, which means the object path is filtered instead.
#SNIDisabled: steam, true

# These set the range for the network widget. The widget changes colors at six intervals:
#    - Below Min...Bytes ("under")
#    - Between ]0%;25%]. 0% = Min...Bytes; 100% = Max...Bytes ("low")
#    - Between ]25%;50%]. 0% = Min...Bytes; 100% = Max...Bytes ("mid-low")
#    - Between ]50%;75%]. 0% = Min...Bytes; 100% = Max...Bytes ("mid-high")
#    - Between ]75%;100%]. 0% = Min...Bytes; 100% = Max...Bytes ("high")
#    - Above Max...Bytes ("over")
MinDownloadBytes: 0
MaxDownloadBytes: 10485760 # 10 * 1024 * 1024 = 10 MiB
MinUploadBytes:   0
MaxUploadBytes:   5242880    # 5 * 1024 * 1024 = 5 MiB